How to Log Kafka Data to Oracle

Open Automation Software can be configured to connect to Kafka using the Kafka connector and log the data to an Oracle database. This guide walks you through downloading and installing OAS, configuring a Kafka data source connector, configuring tags and logging them to an Oracle database.

For this guide on how to log Kafka data to Oracle you will need:

• An Oracle database and user account with permission to create tables, procedures, indexes and read and write data
• Docker installed in Linux or Windows including the docker-compose utility

1 - Download and Install OAS

If you have not already done so, you will need to download and install the OAS platform.

Fully functional trial versions of the software are available for Windows, Windows IoT Core, Linux, Raspberry Pi and Docker on our downloads page.

On Windows, run the downloaded setup.exe file to install the Open Automation Software platform. For a default installation, Agree to the End User License Agreement and then click the Next button on each of the installation steps until it has completed.

If you'd like to customize your installation or learn more, use the following instructions:

• Windows Installation
• Linux Installation
• Raspberry Pi Installation
• Docker Installation

The OAS Service Control application will appear when the installation finishes on Windows.

Click on each START SERVICE button to start each of the three OAS services.

2 - Configure OAS

Web Configuration Application

Configuration of the OAS server is performed from the built-in Web Configuration Application. This is the main application for accessing any settings within the OAS server and is completely self-contained within the server.

You can reach this by opening your browser to:

http://<your server>:58725/app/config

If you are browsing from the OAS machine itself, you can use localhost, otherwise use the IP address of the machine. You will also need to ensure port 58725 is open on both the client and the server or you may not be able to reach the application.

On a new installation the OAS engine has no accounts yet, so the first screen you see is Create Admin Account. Once the administrator account exists that screen is not shown again, and browsing to the application displays the sign in screen instead.

1. Enter a name for the administrator in the Admin user name field. Typically you would use admin, but you can use whatever name you choose.

2. Enter a password in the Password field, then enter the same password again in the Confirm password field.

3. Click on the Create admin & sign in button. The account is created and you are signed in to the engine.

To sign in from then on, enter the Network node of the OAS engine, then the Username and Password of your account, and click on the Sign in button.

Legacy Configuration Application

1. From your operating system start menu, open the Configure OAS application.

2. Select the Configure > Tags screen.

   Important

   If this is the first time you have installed OAS, the AdminCreate utility will run when you select a screen in the Configure menu. This will ask you to create a username and password for the admin user. This user will have full permissions in the OAS platform.

   For further information see Getting Started - Security.

3. If this is the first time you are logging in, you will see the AdminCreate utility. Follow the prompts to set up your admin account. Otherwise, select the Log In menu button and provide the Network Node, username and password.

   

   

3 - Create a Kafka test cluster using Docker

In this step you will create a local Kafka cluster. To simplify the deployment you will need to have Docker installed including the docker-compose utility. This method allows you to create a cluster very quickly for testing purposes and remove it again when you are done.

1. Create a new folder such as Kafka and inside the folder create a new docker-compose.yml file with the following definition.

   services:
       zookeeper:
           image: confluentinc/cp-zookeeper:latest
           container_name: zookeeper
           ports:
               - "2181:2181"
           environment:
           ZOOKEEPER_CLIENT_PORT: 2181
           ZOOKEEPER_TICK_TIME: 2000
   
       kafka:
           image: confluentinc/cp-kafka:latest
           container_name: kafka
           ports:
               - "9092:9092"
           environment:
           KAFKA_BROKER_ID: 1
           KAFKA_ZOOKEEPER_CONNECT: zookeeper:2181
           KAFKA_ADVERTISED_LISTENERS: PLAINTEXT://localhost:9092
           KAFKA_LISTENER_SECURITY_PROTOCOL_MAP: PLAINTEXT:PLAINTEXT
           KAFKA_OFFSETS_TOPIC_REPLICATION_FACTOR: 1
   
   

2. Open a command line or bash terminal in the Kafka folder and use the following command to start a new container. This will download the image and all its dependencies and may take a few minutes.

   docker-compose up -d

3. Create a new topic called temperature using the following command.

   docker exec kafka kafka-topics --create --topic temperature --bootstrap-server localhost:9092 --partitions 1 --replication-factor 1

4 - Configure Kafka Consumer Connector

In the following steps you will create and configure a Kafka Connector connecting to a local Kafka cluster on port 9092. This connector will act as a Consumer where Tags can subscribe to a topic in the cluster.

1. Select Drivers in the sidebar.

2. Click + Add, enter a meaningful Driver Interface Name to give this driver interface instance a unique name (for example Kafka Consumer), and click Create. Once created, the driver interface name should appear in the list of drivers.

3. Ensure the following parameters are configured:

   • Driver: Kafka
   • Bootstrap Servers: localhost:9092
   • Security Protocol: Plaintext
   • Client Id: oas-kafka

   

   The app flags the Bootstrap Servers field because it is still the default localhost:9092. That is the address of the local test cluster you created, so leave it as it is. Change it if your broker is on another host or port.

4. Turn on Enable and click on the Apply changes button. The driver interface is not active until it is enabled and the changes are applied.

   

5 - Add Data Source Tag

In this section you will create a Tag to represent your data point in the field (for example a temperature sensor). This can then be transferred your desired destination.

1. In the sidebar menu, select Tags.

   

2. If you want to add a Tag to the root Tags group make sure another tag at the root is selected. Click the [+] button and select Add Tag.

   

   If you want to add a Tag to a Tag Group, select the Tag Group first and then click on the [+] button. Alternatively, you can right click on a Tag Group and select Add Tag.

   You can also add Tag Groups by clicking the [+] and selecting Add Group.

3. Provide a Tag Name such as TemperatureSensor and click the Create button.

   

6 - Assign Kafka as Tag Data Source

You will now set the Tag's data source to the Kafka driver interface that you created previously.

1. Select the Tag that will source data from a Kafka data source.

   

2. Set the Data Source to Kafka.

3. Set the Select Driver Interface drop-down to the Kafka Consumer interface created previously.

4. Set the Topic to temperature. This is the topic that you created previously when setting up the local Kafka cluster.

   

5. Click on the Apply changes button to apply the changes.

6. To publish a data value from your Kafka cluster, you can use the following command.

   docker exec -i kafka kafka-console-producer --topic temperature --bootstrap-server localhost:9092

   You can now type in any data such as a numeric value and it will be published to the temperature topic.

7. Check that the quality status is Good and the Tag value is as expected.

   

7 - Configure Data Logging

You will now configure data logging to an Oracle database.

1. Select Data Logging in the sidebar.

2. Click + Add, enter a meaningful Logging Group Name to give this data logging group a unique name, and click Create. Once created, the data logging group name should appear in the list of logging groups. A data logging group is simply a data logging configuration for a set of Tags.

3. In the Common section leave all the default values. This will create a configuration that uses Continuous logging with a 1 second Logging Rate. This simply means, log data at a rate of 1 second.

   

4. In the Tags section you will add all of the Tags that you want to log. Each Tag will be a field (column) in the database. Click on the Add button to bring up the Browse for Tag window.

5. Select the Tag you want to add and then click on the Use this tag button.

   

   Tips

   Each Tag has dozens of properties that are available for you to access. The Value property is selected for you, shown at the bottom of the window as TagName.Value. It is the most commonly used property as it presents the Tag's current value. This is what we want to log to the database.

6. The Database tag window will appear. This is where you set the database field name (column name) and the database data type that will be used. The most common types will be Double Float, Boolean, Integer and String.

   The Field name is filled in for you from the Tag name. Let's replace it with Temperature. Now click on the OK button.

   

7. The Tag will appear in the list of Tags to be logged.

   

8. In the Database section you will configure the database type and connection parameters:

   • Turn on Log to Database to enable logging to a database
   • Set Provider to Oracle
   • Set Server to your Oracle server (e.g., localhost)
   • Set Database to oas_logging
   • Set Table to a table name such as Temperatures
   • Set User Name to a user with permissions to manage the oas_logging database
   • Set Password to the user password

   

9. Return to the Common section and turn on Logging Active. New logging groups are created inactive, so this is what starts the group logging.

   

10. Click on the Apply changes button to apply the data logging group configuration.

    

11. Your database logging group is now active.

8 - Save Changes

Once you have successfully configured your OAS instances, make sure you save your configuration.

On each configuration page that has a Save button, click on it.

If this is the first time you are saving the configuration, or if you are changing the name of the configuration file, OAS will ask you if you want to change the default configuration file.

If you select Yes then OAS will make this configuration file the default and if the OAS service is restarted then this file will be loaded on start-up.

If you select No then OAS will still save your configuration file, but it will not be the default file that is loaded on start-up.