How to Transfer Data from Sparkplug B to AWS IoT Core

Open Automation Software can be used to transfer data from Sparkplug B Edge of Network devices to AWS IoT Core, locally or over a network. This guide walks you through downloading and installing OAS, configuring a simulated Edge of Network node, a Host App connector and an AWS IoT Core publisher, and finally publishing the tag using the AWS IoT Core publisher.

Sparkplug B can be used with any standard MQTT broker. For the purposes of this guide on how to transfer data from Sparkplug B to AWS IoT Core, you will use the built-in OAS MQTT Broker. Alternatively, you can also use an existing broker as long as you have the connection details such as the IP address and authentication credentials.

Typically you will also have an Edge of Network (EoN) node configured. For the purposes of this guide, you will create an EoN node and a Tag to simulate data changes. You can also use your own EoN node if you already have one.

For this guide on how to transfer data from Sparkplug B to AWS Iot Core you will need:

• An AWS account with access to the AWS IoT Core console

1 - Download and Install OAS

If you have not already done so, you will need to download and install the OAS platform.

Fully functional trial versions of the software are available for Windows, Windows IoT Core, Linux, Raspberry Pi and Docker on our downloads page.

On Windows, run the downloaded setup.exe file to install the Open Automation Software platform. For a default installation, Agree to the End User License Agreement and then click the Next button on each of the installation steps until it has completed.

If you'd like to customize your installation or learn more, use the following instructions:

• Windows Installation
• Linux Installation
• Raspberry Pi Installation
• Docker Installation

The OAS Service Control application will appear when the installation finishes on Windows.

Click on each START SERVICE button to start each of the three OAS services.

2 - Configure OAS

Configure OAS is the main application used to configure local and remote OAS instances.

1. From your operating system start menu, open the Configure OAS application.

2. Select the Configure > Tags screen.

   Important

   If this is the first time you have installed OAS, the AdminCreate utility will run when you select a screen in the Configure menu. This will ask you to create a username and password for the admin user. This user will have full permissions in the OAS platform.

   For further information see Getting Started - Security.

3. If this is the first time you are logging in, you will see the AdminCreate utility. Follow the prompts to set up your admin account. Otherwise, select the Log In menu button and provide the Network Node, username and password.

   

   

3 - Check that the MQTT Broker is enabled

If you are using the OAS MQTT Broker, you can follow the steps below to ensure it is enabled, otherwise you can skip this step.

1. Select Configure > Options from the top menu.

   

2. Select the MQTT Broker tab.

3. Check that the OAS MQTT Broker Enable checkbox is checked and the OAS MQTT Broker Port is configured as 1883.

   

4 - Create Security Group and User

When using Sparkplug B over the OAS MQTT Broker, you need to configure a security group and a user to provide Tag read/write access. You'll need these credentials when creating the Sparkplug B connector instances later.

ℹ️ You can skip this step if you already have your own MQTT Broker.

1. Select Configure > Security from the top menu.

   

2. Provide a Group Name such as SparkplugAccess.

   

3. Click on the DISABLE ALL button to disable all access.

   

4. In the Read Tags tab, ensure Disable All Tags From Reading is NOT checked.

   

5. In the Write Tags tab, ensure Disable Add Tags From Writing is NOT checked.

   

6. Click on the ADD GROUP button on the left hand side to add this security group configuration. Once added, the security group name should appear in the list of security groups.

   

7. Select Configure > Users from the top menu.

   

8. Provide a User Name such as sparkpluguser, a password and set the Security Group as SparkplugAccess.

   

9. Click on the ADD USER button on the left hand side to add this user configuration. Once added, the user name should appear in the list of users.

   

5 - Create Sparkplug B EoN node

In order to simulate an Edge of Network (EoN) node, we can use the features available in OAS to create an EoN using a Sparkplug B connector instance and leverage the built-in MQTT broker.

ℹ️ You can skip this section if you want to use your own existing EoN node. You'll have to ensure that your EoN node is configured with the details in step 3 below so that it can talk to the OAS Host App.

1. Select Configure > Drivers from the top menu.

   

2. Enter a name such as EoN Node A in the Driver Interface Name to give this driver interface a unique name.

3. Ensure the following parameters are configured:

   • Driver: Sparkplug B
   • Host: localhost
   • Port: 1883
   • User Name: sparkpluguser
   • Password: the password you configured in the previous step
   • Protocol Driver: V500
   • Client ID: OAS_Node
   • Mode: Edge Node
   • Group ID: Group1
   • Edge Node ID: NodeA

   

4. Click on the ADD DRIVER button on the left hand side to add this driver configuration. Once added, the driver interface name should appear in the list of drivers.

   

6 - Create a Tag attached to EoN for simulation

Now that the EoN node has been created we want to be able to publish data from it so we can simulate data being generated by the EoN node. We'll need this to test the Sparkplug B Host App we will create in the next step.

ℹ️ If you skipped creating an EoN node in OAS and you already have your own EoN node configured, you can skip this section as well and instead generate some data in your own EoN node.

1. Select Configure > Tags from the top menu.

   

2. If you want to add a Tag to the root Tags group make sure the Tags node is selected in the tag list and click on the ADD TAG button.

   

   If you want to add a Tag to a Tag Group, select the Tag Group first and then click on the ADD TAG button.

   You can also add Tag Groups by using the ADD GROUP button.

3. Provide a Tag Name such as TemperatureSensor and click the OK button.

   

4. To assign this Tag to a Sparkplug B node configure the Host properties to match your EoN node Group ID and Edge Node ID properties.

   • Host Group ID: Group1
   • Host Edge Node ID: NodeA
   • Host Device ID: EoN Sim
   • Host Metric Name: Temperature

   

5. Click on the Apply Changes button to apply the changes.

7 - Set up Sparkplug B Host App to receive data from the EoN node

In this section you will create a Sparkplug B driver configured using Host App mode, which will also automatically create the Tags provided by the EoN node.

1. Select Configure > Drivers from the top menu.

   

2. Enter a name such as SpB Host App in the Driver Interface Name to give this driver interface a unique name.

3. Ensure the following parameters are configured:

   • Driver: Sparkplug B
   • Host: localhost
   • Port: 1883
   • User Name: sparkpluguser
   • Password: the password you configured in the previous step
   • Protocol Driver: V500
   • Client ID: OAS_Client_Host
   • Mode: Host App
   • Host ID: OAS_Host (this needs to match in the EoN node driver)

   

   ℹ️ If you are using your own MQTT Broker, ensure that you configure the Host, Port, User Name, Password and Protocol Driver accordingly.

4. Click on the ADD DRIVER button on the left hand side to add this driver configuration. Once added, the driver interface name should appear in the list of drivers.

   

8 - Verify Host App Tag Generation

You will now check to make sure the Tag Group folder structure and Tag for the Temperature metric was automatically generated and that any updates to the TemperatureSensor tag will flow through from the EoN node to the generated Tag.

1. Select Configure > Tags from the top menu.

   

   Tips

   If you were already on the Tags screen, you may need to click on the SELECT button next to the Network Node drop-down list to refresh the tag list.

2. You will see a Tag Group structure starting with a parent folder called SpB Host App and then a sub-folder for Group1, another sub-folder for NodeA and finally a sub-folder for the EoN node called EoN Sim. The Temperature tag representing the Temperature metric is inside this final sub-folder.

   As you can see the Sparkplug B host app driver has automatically generated the folder structure and Tags.

   

3. Select the Temperature tag in the EoN Sim sub-folder. You should see a value of zero (0) and the Client parameters configured according to the EoN node Host properties. These properties were automatically configured by OAS.

   

4. Now you will test the data flow.

   ℹ️ If you have your own EoN node configured and you skipped creating an EoN node in OAS then you can trigger a data change in your EoN node to test the configuration.

   If you created an EoN node in OAS you can select the TemperatureSensor tag in the root Tags folder. Type in a value of 24.9 in the Enter Value field and click on the Apply Changes button. If everything is working correctly, this change should trigger the EoN node to publish a new value via the OAS MQTT Broker.

   

5. Select the Temperature tag again in the EoN Sim sub-folder. You should now see a value of 24.9.

   

9 - Create Publisher Thing in AWS IoT Core

In this step you will create a Thing in the AWS IoT Core service and the required certificate and policies for publishing tag values to AWS IoT Core. This represents your connection and security settings between OAS and AWS IoT Core.

1. Login to the AWS Console and select the AWS IoT service.

2. Under the Manage and All Devices menu select Things.

3. Click on the Create things button to start the create new things wizard.

4. Select Create single thing and click on the Next button.

   

5. Set the Thing name to OAS_Publisher and click on the Next button.

   

6. Leave the default option to generate device certificate automatically and click on the Next button.

   

7. Select the Create policy button. This will open a new browser tab or window.

8. Set the Policy name to OASPublisherPolicy. The policy will need to allow the iot:Connect and iot:Publish actions. For the purpose of this guide the policy will allow all resources using the * wildcard.

   

   Important

   For security best practices in production systems you should always restrict your policy to the client ID and AWS resource name (ARN) that represents your region, account and topic paths.

9. Go back to the create thing wizard and select the OASPublisherPolicy. Click on the Create thing button.

10. You will see a window relating to certificates. Download the device certificate, the public key file, the private key file and one of the Root CA certificates. You should keep these files in a folder with limited permissions. You'll need them when configuring the AWS IoT Core publisher in the OAS platform.

    

10 - Configure AWS IoT Core Publisher

In the following steps you will create and configure an AWS IoT Core Publisher for publishing tag values.

1. To determine the AWS IoT Core endpoint you will need to login to the AWS console and select the AWS IoT service. Select the Domain configurations menu.

2. If you don't already have a domain name use the Create domain configuration button to create one. You will need to take a note of the Domain name property, which represents your AWS IoT Core broker endpoint.

3. In the Configure OAS application, select Configure > Drivers from the top menu.

   

4. Enter a meaningful Driver Interface Name to give this driver interface instance a unique name (for example AWS IoT Publisher).

5. Ensure the following parameters are configured:

   • Driver: AWS IoT Gateway
   • BrokerPort: 8883
   • Create Certificate: Select this if running Windows
   • Client Certificate File: The device certificate pem.crt file from the previous section
   • Client Certificate Key File: The private pem.key file from the previous section
   • Server Certificate File: The Root CA pem file from the previous section
   • Client ID: OASPublisher
   • IoT End Point: This is your AWS Iot Core endpoint from step 2 above

   

   Info

   If you are using Linux, you can generate a PFX certificate using OpenSSL.

   openssl pkcs12 -export \
       -out oas-connection-certificate.pfx \
       -inkey 2ed57ff8e30d1a12345f69bc2a8a6b4a1721b123456789912e675cc74111ced7-private.pem.key \
       -in 2ed57ff8e30d1a12345f69bc2a8a6b4a1721b123456789912e675cc74111ced7-certificate.pem.crt \
       -certfile AmazonRootCA1.pem
   

   You can then use the generated certificate and password in your AWS IoT Gateway driver configuration:

   

6. Click the ADD DRIVER button on the left hand side to add this driver configuration. Once added, the driver interface name should appear in the list of drivers.

   

11 - Publish Selected Tags in AWS IoT Gateway connector

In this step you will select the Tags that you want to publish to the AWS IoT Core broker in the AWS IoT Gateway connector configuration.

1. In the Configure > Drivers screen, select the AWS IoT Core driver instance that you created in the previous section (for example AWS IoT Core Connection 1).

2. Make sure the Publish Selected Tags checkbox is ticked.

   

3. In the table at the bottom click on the ADD button.

   

4. Select the Tag you want to add in the left hand panel and then ensure the Value property is selected. By default the name of the property will be the full Tag path (e.g. SpB Host App.Group1.NodeA.EoN Sim.Temperature.Value). If you want to set your own property name, you can change the Id field to your own custom value.

   

5. The Tag has now been added to the list. You can add other Tags by repeating steps 3 and 4.

   

6. Click on the Apply Changes button.

12 - Verify Messages are Published to AWS IoT Core

In this step you will confirm that OAS is successfully publishing your selected Tags to AWS IoT Core. By default, the publishing type is set to Continuous and the interval is 10 seconds.

1. Login to the AWS Console and select the AWS IoT service.

2. Under the Test menu select MQTT test client.

3. The default topic will be oas_tags. To check that we can receive messages on this topic, provide this topic name in the Topic filter text box and then click on the Subscribe button.

   

4. In the Subscriptions section you should see the MQTT payload being published.

   

13 - Save Changes

Once you have successfully configured your OAS instances, make sure you save your configuration.

On each configuration page, click on the Save button.

If this is the first time you are saving the configuration, or if you are changing the name of the configuration file, OAS will ask you if you want to change the default configuration file.

If you select Yes then OAS will make this configuration file the default and if the OAS service is restarted then this file will be loaded on start-up.

If you select No then OAS will still save your configuration file, but it will not be the default file that is loaded on start-up.