Posted on

How to Transfer Data from Allen Bradley to Modbus

How to Transfer Data from Allen Bradley to Modbus


Open Automation Software can be used to transfer data from Allen Bradley ControlLogix, CompactLogix, GuardLogix, Micro800 MicroLogix, SLC 500, and PLC-5 controllers to Modbus TCP, Modbus RTU, and Modbus ASCII devices, locally or over a network.  This tutorial walks you through downloading and installing OAS, configuring an Allen Bradley and a Modbus driver, configuring Allen Bradley and Modbus tags and implementing Data Route.

Step 1. Download and Install the Open Automation Software and Start the OAS Service

If you have not already done so, you will need to download and install the OAS platform.  Fully functional trial versions of the software are available for Windows, Windows IoT Core, Linux, Raspberry Pi and Docker on our downloads page.

On Windows run the downloaded Setup.exe file to install one or more of the Open Automation Software features. Select the default Typical installation if you are not sure what features to use or the Custom installation if you want to save disk space on the target system.  When prompted agree to the End User License Agreement to continue the installation.

For more detailed instructions and video tutorials, visit the installation guide for your system:
Windows Installation | Linux Installation | Raspberry Pi Installation | Dockers Installation

The OAS Service Control application will appear when the installation finishes on Windows.  Use this application to start the 3 Services. Run the Configure OAS application on Windows and select Configure-Tags; if the first time running, the AdminCreate utility will run to create an Administrator login as shown in Step 1 of Getting Started – Security.

Step 2. Configure Your Allen Bradley Data Source

  1. First, you will need to open the Configure OAS application from the program group Open Automation Software.

  2. Select Configure >> License from the top menu and verify that Allen Bradley is one of the available Drivers in the lower left of the form. The demo license will have this by default. If you do not see Allen Bradley available, contact support@openautomationsoftware.com to update your license.

  3. Select Configure >> Drivers from the top menu.


  4. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.


  5. The Configure Drivers Screen will appear. Select either AB Classic for MicroLogix, SLC 500, and PLC-5 or AB Logic for ControlLogix, CompactLogix, GuardLogix, and Micro800 from the Driver dropdown box.


  6. Enter a meaningful Driver Interface Name that you will refer to this physical connection when defining Tags with an Allen Bradley Data Source.

  7. Define the properties for the desired physical connection.

  8. Click the Add Driver button above the Driver list in the left pane to add the Driver Interface as an available selection when defining Tags in the next step.

For more detailed instructions on configuring your Allen Bradley data source, click here to see our Getting Started Allen Bradley tutorial.

Step 3. Configure Your Modbus Data Source

  1. First, you will need to open the Configure OAS application from the program group Open Automation Software.

  2. Select Configure >> License from the top menu and verify that Modbus is one of the available Drivers in the lower left of the form. The demo license will have this by default. If you do not see Modbus available, contact support@openautomationsoftware.com to update your license.

  3. Select Configure >> Drivers from the top menu.


  4. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.


  5. The Configure Drivers Screen will appear. Select Modbus from the Driver dropdown box.


  6. Enter a meaningful Driver Interface Name that you will refer to this physical connection when defining Tags with a Modbus Data Source.

  7. Specify the Connection as Ethernet or Serial.

  8. Specify the Modbus Type as Master or Slave. Master will be used when communicating to a Modbus device. Slave will be used when other Modbus masters will be communicating to OAS.

  9. When setting up a Slave interface over Ethernet set the IP Address to the computer IPv4 IP address or network node name if the master is on a remote PC. You can also use 127.0.0.1 or localhost if the Modbus master will be on the same computer.

For more detailed instructions on configuring your Modbus data source, click here to see our Getting Started Modbus tutorial or watch the video tutorial below:

Step 4. Configure Your Allen Bradley Tags

OAS provides multiple ways to add and define tags:

To add a Tag manually:

  1. In the OAS Configure Application, select Configure >> Tags from the top menu.


  2. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.


  3. Click on the Add Tag button located at the top of the Tag browser on the left portion of the screen.


  4. A dialog box will appear. Enter a name for your new tag and click ok.

  5. A configuration screen will appear for your new tag. Select your data source type in in the Data Source dropdown box.


  6. Specify the correct data type in the Data Type dropdown box.

  7. Click Apply Changes at the bottom right of the window.

For more detailed instructions on configuring your tags, click here to see our Getting Started Tags tutorial.

Step 5. Repeat Step 4 with Your Modbus Tags

Step 6. Configure the Target Tab of the Source Tags

  1. Select one of your source tags.

  2. Select it’s Target tab.


  3. Enable Write to Target

  4. Select the Target Type (Tag, OPC, Azure IoT, Azure IoT Edge, or MQTT) from the dropdown.

  5. Select the destination for the value to be sent. If Tag is selected then select Browse and select the desired tag from the localhost system or optionally a remote system for transfer over a network.



    Local: TagName.Value

    Remote: \\192.168.0.1\TagName.Value

    If OPC Item is selected select browse and select the OPC Server and Item



    If Azure IoT is selected then select the Driver Interface.



    If MQTT is selected then select the Driver Interface and Topic.




  6. Enter the desired float value Deadband field. Enter 0 for no deadband.

  7. If you want to specify a desired update frequency for the target check Write Continuously and enter the desired frequency. If Write Contentiously is unchecked the the target will be updated every time the source tag changes.

  8. Click the Apply Changes button to save your changes.

  9. Repeat this step for each tag that you want to transfer data from. This can also be done in bulk with CSV Import/Export or programatically.

For more detailed instructions on Configuring Data Route functionality, visit our Getting Started – Data Route tutorial or watch the videos below:

Multiple Tag Transfer

Tag to Tag Transfer

IoT Publish

Posted on

How To Set Up AWS IoT

Open Automation Software can put your data in the cloud.  The articles below are concise guides to working with OAS and AWS IoT.

Posted on

How To Set Up OPC Server

Short guides for some of the most common OPC Server tasks.

Posted on

How to Configure OAS with OPC UA

OAS can be both and OPC UA client and an OPC UA server.  The guides below will get you started using OAS with OPC UA.

Posted on

How to Configure MTConnect with OAS

The OAS MTConnect Driver allows you to directly connect and configure your MTConnect data source.  The articles below will help you get started working with your data.

Posted on

How To Set Up MQTT with OAS

OAS can function as both an MQTT broker and an MQTT client.  You will find useful resources below to get you started.

Posted on

How to Guides for the OAS Siemens Driver

Open Automation Software Tags can be defined to connect directly to Siemens controllers with the built in Siemens Driver Interfaces which support communications over Ethernet to S7-200, S7-300, S7-400, S7-1200, and S7-1500.  Below you will find instructional guides to help you do things with your Siemens data.

Posted on

How To Set Up Modbus

Short guides for some of the most common Modbus tasks.

Posted on

How to Log Siemens Data to a CSV or Excel File

How to Log Siemens Data to a CSV or Excel File

Open Automation Software can connect directly to Siemens controllers with the built in Siemens Driver Interfaces which support communications over Ethernet to S7-200, S7-300, S7-400, S7-1200, and S7-1500. This tutorial walks you though downloading and installing OAS, configuring a Siemens driver, configuring tags and logging them to a CSV or Excel File.

Step 1. Download and Install the Open Automation Software and Start the OAS Service

If you have not already done so, you will need to download and install the OAS platform.  Fully functional trial versions of the software are available for Windows, Windows IoT Core, Linux, Raspberry Pi and Docker on our downloads page.

On Windows run the downloaded Setup.exe file to install one or more of the Open Automation Software features. Select the default Typical installation if you are not sure what features to use or the Custom installation if you want to save disk space on the target system.  When prompted agree to the End User License Agreement to continue the installation.

For more detailed instructions and video tutorials, visit the installation guide for your system:
Windows Installation | Linux Installation | Raspberry Pi Installation | Dockers Installation

The OAS Service Control application will appear when the installation finishes on Windows.  Use this application to start the 3 Services. Run the Configure OAS application on Windows and select Configure-Tags; if the first time running, the AdminCreate utility will run to create an Administrator login as shown in Step 1 of Getting Started – Security.

Step 2. Configure Your Siemens Data Source

  1. First, you will need to open the Configure OAS application from the program group Open Automation Software.

  2. Select Configure >> License from the top menu and verify that Siemens is one of the available Drivers in the lower left of the form. The demo license will have this by default. If you do not see Siemens available, contact support@openautomationsoftware.com to update your license.

  3. Select Configure >> Drivers from the top menu.

  4. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.

  5. The Configure Drivers Screen will appear. Select Siemens from the Driver dropdown box.

  6. Enter a meaningful Driver Interface Name that you will refer to this physical connection when defining Tags with a Siemens Data Source.

  7. Define the properties for the desired physical connection.

  8. Click the Add Driver button above the Driver list in the left pane to add the Driver Interface as an available selection when defining Tags in the next step.

For more detailed instructions on configuring your Siemens data source, click here to see our Getting Started Siemens tutorial.

Step 3. Configure Your Tags

OAS provides multiple ways to add and define tags:

To add a Tag manually:

  1. In the OAS Configure Application, select Configure >> Tags from the top menu.

  2. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.

  3. Click on the Add Tag button located at the top of the Tag browser on the left portion of the screen.

  4. A dialog box will appear. Enter a name for your new tag and click ok.

  5. A configuration screen will appear for your new tag. Select your data source type in in the Data Source dropdown box.

  6. Specify the correct data type in the Data Type dropdown box.

  7. Click Apply Changes at the bottom right of the window.

For more detailed instructions on configuring your tags, click here to see our Getting Started Tags tutorial.

Step 4. Configure Data Logging for CSV

  1. In the OAS Configure Application, select Configure >> Data Logging from the top menu.

  2. Select localhost or the remote service you wish to log data from with the Select button to the right of the Network Node list.

  3. A Logging Group screen will appear.

  4. Give your Logging Group a name that is meaningful to you.

  5. In the Common tab, you will determine your table format and type of logging you wish to implement.

  6. In the Tags tab, you will select the tags you wish to log.

  7. If you want to log to a database such as SQL Server, use the Database tab.

  8. To log to CSV, use the CVS Logging tab.

  9. Specify the Path where you would like your file to be created.

  10. Enter a file name in the File Name field.

  11. Once you have all of the tabs configured, click Add Group in the left panel to add your logging group to the service.

For more detailed instructions on Configuring Data Logging, visit our Getting Started Data Logging tutorial or watch the video tutorial below:

  • 00:00 – Introduction
  • 01:30 – Getting Started
  • 03:00 – Continuous Logging
  • 04:15 – SQL Server
  • 06:25 – Save Changes
  • 07:00 – Continuous Narrow Logging
  • 09:30 – Event Driven
  • 11:20 – Handshake Confirmation
  • 12:45 – High Speed Logging
  • 15:00 – Log to Stored Procedure
  • 15:25 – Triggers
  • 16:30 – Event Narrow Logging
  • 18:00 – Timestamps
  • 20:30 – Snapshot Logging
  • 21:45 – Specific Time of Day Logging
  • 22:50 – Data Change Row Logging
  • 25:15 – Data Change Narrow Logging
  • 26:45 – Networking
  • 31:55 – Store and Forward
  • 37:30 – Disable Store and Forward
  • 40:15 – Update Records
  • 40:50 – Dynamic Server, Database, and Table
  • 41:10 – Automatic Deletion
  • 41:40 – CSV File Logging
  • 45:30 – Programmatic Interface
  • 46:45 – CSV Export / Import
  • 48:20 – One Click Automation
  • 52:20 – Transaction Logging
  • 54:25 – System Errors
  • 56:00 – Contact Us
  • 56:50 – Read Database Data

Posted on

How to Log OPC UA Data to a CSV or Excel File

How to Log OPC UA Data to a CSV or Excel File

Open Automation Software Tags can be defined to connect to OPC UA Servers with the built in OPC UA Driver Interface. This tutorial walks you though downloading and installing OAS, configuring an OPC UA driver, configuring tags and logging them to a CSV or Excel file.

Step 1. Download and Install the Open Automation Software and Start the OAS Service

If you have not already done so, you will need to download and install the OAS platform.  Fully functional trial versions of the software are available for Windows, Windows IoT Core, Linux, Raspberry Pi and Docker on our downloads page.

On Windows run the downloaded Setup.exe file to install one or more of the Open Automation Software features. Select the default Typical installation if you are not sure what features to use or the Custom installation if you want to save disk space on the target system.  When prompted agree to the End User License Agreement to continue the installation.

For more detailed instructions and video tutorials, visit the installation guide for your system:
Windows Installation | Linux Installation | Raspberry Pi Installation | Dockers Installation

The OAS Service Control application will appear when the installation finishes on Windows.  Use this application to start the 3 Services. Run the Configure OAS application on Windows and select Configure-Tags; if the first time running, the AdminCreate utility will run to create an Administrator login as shown in Step 1 of Getting Started – Security.

Step 2. Configure Your OPC UA Data Source

  1. First, you will need to open the Configure OAS application from the program group Open Automation Software.

  2. Select Configure >> License from the top menu and verify that OPC UA is one of the available Drivers in the lower left of the form. The demo license will have this by default. If you do not see OPC UA available, contact support@openautomationsoftware.com to update your license.

  3. Select Configure >> Drivers from the top menu.

  4. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.

  5. The Configure Drivers Screen will appear. Select OPC UA from the Driver dropdown box.

  6. Enter a meaningful Driver Interface Name that you will refer to this physical connection when defining Tags with a OPC UA Data Source.

  7. Define the properties for the desired physical connection.

  8. Click the Add Driver button above the Driver list in the left pane to add the Driver Interface as an available selection when defining Tags in the next step.

For more detailed instructions on configuring your OPC DA data source, click here to see our Getting Started OPC UA tutorial.

Step 3. Configure Your Tags

OAS provides multiple ways to add and define tags:

To add a Tag manually:

  1. In the OAS Configure Application, select Configure >> Tags from the top menu.

  2. Select localhost or the remote service you wish to modify with the Select button to the right of the Network Node list.

  3. Click on the Add Tag button located at the top of the Tag browser on the left portion of the screen.

  4. A dialog box will appear. Enter a name for your new tag and click ok.

  5. A configuration screen will appear for your new tag. Select your data source type in in the Data Source dropdown box.

  6. Specify the correct data type in the Data Type dropdown box.

  7. Click Apply Changes at the bottom right of the window.

For more detailed instructions on configuring your tags, click here to see our Getting Started Tags tutorial.

Step 4. Configure Data Logging for CSV

  1. In the OAS Configure Application, select Configure >> Data Logging from the top menu.

  2. Select localhost or the remote service you wish to log data from with the Select button to the right of the Network Node list.

  3. A Logging Group screen will appear.

  4. Give your Logging Group a name that is meaningful to you.

  5. In the Common tab, you will determine your table format and type of logging you wish to implement.

  6. In the Tags tab, you will select the tags you wish to log.

  7. If you want to log to a database such as SQL Server, use the Database tab.

  8. To log to CSV, use the CVS Logging tab.

  9. Specify the Path where you would like your file to be created.

  10. Enter a file name in the File Name field.

  11. Once you have all of the tabs configured, click Add Group in the left panel to add your logging group to the service.

For more detailed instructions on Configuring Data Logging, visit our Getting Started Data Logging tutorial or watch the video tutorial below:

  • 00:00 – Introduction
  • 01:30 – Getting Started
  • 03:00 – Continuous Logging
  • 04:15 – SQL Server
  • 06:25 – Save Changes
  • 07:00 – Continuous Narrow Logging
  • 09:30 – Event Driven
  • 11:20 – Handshake Confirmation
  • 12:45 – High Speed Logging
  • 15:00 – Log to Stored Procedure
  • 15:25 – Triggers
  • 16:30 – Event Narrow Logging
  • 18:00 – Timestamps
  • 20:30 – Snapshot Logging
  • 21:45 – Specific Time of Day Logging
  • 22:50 – Data Change Row Logging
  • 25:15 – Data Change Narrow Logging
  • 26:45 – Networking
  • 31:55 – Store and Forward
  • 37:30 – Disable Store and Forward
  • 40:15 – Update Records
  • 40:50 – Dynamic Server, Database, and Table
  • 41:10 – Automatic Deletion
  • 41:40 – CSV File Logging
  • 45:30 – Programmatic Interface
  • 46:45 – CSV Export / Import
  • 48:20 – One Click Automation
  • 52:20 – Transaction Logging
  • 54:25 – System Errors
  • 56:00 – Contact Us
  • 56:50 – Read Database Data